Build Volume:600×600×100 mm

Printing Temperature: Up to 275°C

Hot Bed Temperature::Up to 80°C

Extrusion System:Two In One Extruder

Function: UV Light Curing + Manual Gluing +3D Printing

Material Supported:

Specialized Filament For Advertising Letter, Light Pass And Non Light Pass Filaments


Principle: Fused Filament Fabrication (FFF)

Filament Diameter: 1.75 mm

Layer Thickness: 0.2– 0.4 mm

Position Resolution: X/Y: 8.9 μm Z: 2.5 μm

Print Speed:0 – 150mm/s

Noozle Diameter: 0.6 mm (Default), 0.4 mm, 0.8 mm,1.0 mm

Heat Bed Material:Transparent Heating Pad

Air Filter:Activated Carbon Filters (Choosable)

Technology Certification:CE, RoHS

Software: IEMAI 3D ADV

Printing Platform:Glass Plate


Data Transmission: SD Card, WIFI,  USB

Operating System:Windows 64 Bit

Machine Size: 965×1100×800 mm

Packing Size:1015×1150×965 mm

Net Weight:160KG

Gross Weight: 180KG

Power: 100~250 V, 50~60 Hz 2800W

Suggest Operating Environment:15-30°C, relatively humidity 10-90%, No Moisture Condensation

Storage Temperature:-25 – 55 °C, relatively humidity 10-90%, No Moisture Condensation


Power Failure Recovery

Filament Absent Warning

Auto-Shut Down System

Manual Arcylic Gluing Function


Bottom Plate Printing

UV Light Curing System

UV Light At Base And Top

YM-AUTO-600 is specially designed for common plastic, with a temperature of 275°C extruder temperature and 80°C hot bed temperature a, it is able to support most of the plastic on the market. It had a modular mechanism on the extruder which allow it to have simple maintenance and support the print of two colour in one model.

Print Case

Scroll to top