Build Volume:650×1200 mm

Printing Temperature: Up to 275°C

Hot Bed Temperature:Up to 150°C

Parallel Arm High Print Speed:Up to 200 mm /s

Extrusion System:High Speed Single Extruder

Majority of the Materials on Market:PLA, ABS, TPU, WOOD, CARBON, HIPS, PVA 


Principle: Fused Filament Fabrication (FFF)

Filament Diameter: 1.75 mm

Layer Thickness: 0.02 – 0.4mm

Position Resolution: X/Y: 4.68 μm Z: 4.68 μm

Supplied Software: IEMAI 3D EXPERT

Other Software: Cura, Simplify3D

File Type: STL, OBJ, 3MF, GCODE

Data Transmission: SD Card

Machine Size: 1195×945×2329 mm

Net Weight: 300KG

Gross Weight: 450KG

Power: 220V, 50~60 Hz 3000W


XYZ Axis Closed Loop Motor 

Filament Absent Warning

Power Failure Recovery


Imported Gates Synchronous Belt

Auto Calibration

Auto-Shut Down System

YM-1200 is specialy designed for engineering plastic, with a temperature of 275 °C extruder temperature and 120 °C hotbed temperature, it os able to support most of the common plastic on the market. It has a single extruder which allow it to have simple maintenance.

Scroll to top