YM-AUTO-600

 

 Build Volume:600  × 600 × 100 mm

Printing Temperature: Up to 275°C

Hot Bed Temperature::Up to 80°C

Extrusion System:Two In One Extruder

Function: UV Light + Manual Gluing

Material Supported: Specialized Filament For Adverising Letter, Light Pass And Non Light Pass Filament

Specification

Principle: Fused Filament Fabrication (FFF)

Filament Diameter: 1.75 mm

Layer Thickness: 0.2 – 0.4 mm

Position Resolution: X/Y: 8.9 µm Z: 2.5 µm

Printing Speed: 0 -150 mm/s

Noozle Diameter: 0.8 mm (Default), 0.6 mm, 0.8 mm, 1.0 mm (Choosable)

Heated Bed Material: Silicon

Air Filter: Activated Carbon Filter (Choosable)

Supplied Software: IEMAI 3D EXPERT

Other Software: Cura, Simplify3D

Printing Platform: Glass 

File Type: SVG, NC, DXF, STP,  GCODE

Data Transmission: SD Card, WIFI, USB

Operating System: Windows 64 Bit

Machine Size:965× 1100 × 800 mm

Packing Size: 1015× 1150 × 965 mm

Net Weight:160KG

Gross Weight: 180KG

Power: 100~250 V, 50~60 Hz 2800W

Suggest Operating Environment: 15-30 °C, Relative Humidity 10-90 %, No Moisture Condensation

Storage Temperature:25-55 °C, Relative Humidity 10-90 %, No Moisture Condensation

 

Features

Power Failure Recovery

Filament Absent Warning

Auto-Shut Down System

Manual Arcylic Gluing Function

 

Auto Leveling

Dual Colour Printing 

2D to 3D Software

UV Light At Base And Top

 

YM-AUTO-600 is specially designed for common plastic, with a temperature of 275°C extruder temperature and 150°C hot bed temperature. It can support most of the  specialized advertising filament on market, having a two in one extruder module, allowing it to have simple maintenance and printing two colour in one prototype.

Printing Case

Scroll to top