LAMPPRO-600
Build Volume：600 × 600 × 600 mm
Printing Temperature： Up to 370°C
Hot Bed Temperature:：Up to 180°C
Extrusion System：Single Extruder
Majority of the Materials on Market：PC, PETG, ABS, ASA, HIPS, TPU, PLA, PA…
Specification
Principle: Fused Filament Fabrication (FFF)
Filament Diameter: 2.75/ 3.0 mm
Layer Thickness: 0.6 – 1.2 mm
Position Resolution: X/Y: 8.56 µm Z: 1.56 µm
Printing Speed: 0-150 mm/s
Noozle Diameter: 2.0 mm (Default), 0.4 mm, 0.6 mm, 1.0 mm (Choosable)
Heated Bed Material: Silicon
Air Filter: Activated Carbon Filter (Choosable)
Supplied Software: IEMAI 3D EXPERT
Other Software: Cura, Simplify3D
Printing Platform: Frosted Aluminium
File Type: STL, OBJ, GCODE
Data Transmission: SD Card, USB
Operating System: Windows 64 Bit
Machine Size:982×1024×1924 mm
Packing Size: 1010×1060×2500 mm
Net Weight:450KG
Gross Weight: 580KG
Power: 100~250 V, 50~60 Hz 2300W
Suggest Operating Environment: 15-30 °C, Relative Humidity 10-90 %, No Moisture Condensation
Storage Temperature:25-55 °C, Relative Humidity 10-90 %, No Moisture Condensation
Features
Automatic Opening Door
Automatic Unload Model
Filament Absent Warning
Auto Leveling
Camera Monitoring (Choosable)
LAMPPRO 600 is specially designed for common materials , with a temperature of 370°C extruder temperature and 180°C hot bed temperature. It support most of the common plastic filament on market. LAMPPRO 600 has achieved some achievement in printing lampshade
Printing Case
