| Chinese |                IEMAI 3D:High Performance Materials And Industrial  High Temperature 3D Printer Manufacturer : 3D Printing Solution Of PEEK, PEKK, CFR-PEEK, ULTEM, PPSU, PA, PC , ABS...Materials.

IEMAI 3D Printing

Home > Products > Cooperative Materials

    Clariant PC+ABS GF15

    • Contacts+86 13826965471 Cora
    • ModelPC+ABS GF15
    • BrandCLARIANT

    Clariant 15% glass fiber reinforced (PC + abs-gf15) is made by adding 15% glass fiber to the polycarbonate + acrylonitrile butadiene styrene polymer blend
    provides a durable material with better warp resistance during printing

    Product introduction

    Clariant 15% glass fiber reinforcement (PC + abs-gf15) is made by adding 15% glass fiber to a polycarbonate + acrylonitrile butadiene styrene polymer blend, providing a durable material with better warp resistance during printing.

    Clariant additives are added via Renol ® masterbatch to improve thermal stability and heat-resistant oxidative degradation and yellowing.

    advantages

    Durable engineering thermoplastics, high impact strength, high heat resistance, good low temperature ductility, glass reinforcement helps to reduce warping in the printing process, reduce thermal oxidation degradation, and minimize the undesirable yellowing caused by ultraviolet rays

    application

    Mechanical and technical application parts, prototypes, tools, fixtures, fixtures requiring strength and toughness

    Printing parameters

    Printing temperature = 260-285°C

    Print speed = 30-60 mm/s

    Bed temperature = ideally heated to 110°C

    Fan setting = slow speed

    Technical parameters

    IEMAI 3D Printing

    IEMAI 3D Printing

    Powered by IEMAI  ©2015-2019 www.yimai3d.com